DK 1000 XL Block Plate Metal Cutting Bandsaw machines are designed for heavy duty industrial use. This machine was designed to high capacity of cutting on less floor area to save the customers place.
STANDART FEATURES
Manual Sliding Table
2 x 900mm (24") Aluminum flanged, tapered bandwheels with rubber tires
Upper wheel adjustment up to 76mm (4")
Operator controls mounted on column One set of saw guide blocks with carbide backup for for chosen bands
One set of metal saw guide inserts for chosen bands
T-Slots for Easy Clamping
Band wheel brush
Work light
Hydraulic Bandsaw Tention Unit
Chip blower (plant air required)
Saw blade guards.
Band door interlocks.
Variable frequency band drive.
Post Elevating By AC Motor
One (1) complimentary Bi Metal saw blade.
Operation and parts manuals always available online
Stop Running upon Bandsaw Breake
Bandsaw Speed Indicator
Emergency shut-off buttons
SPECIFICATIONS
Bandsaw Tension Unit: Hydraulic
Table Stroke: Ball Screw 800mm
Band Driving Type: Frequance | Inverter
Max. Cutting Height: 1000 mm ( 40" )
Throat size: 600 mm ( 24" )
Table Dimensions: 1400mm x 1000mm ( 55" x 40" )
Table Tilt Left: N/A
Table Tilt Right: N/A
Table Tilt Front: N/A
Table Tilt Back: N/A
Table Height: 1177 mm
Motor Power: 5 kW
Bandsaw Speed: Can be arranged upon request
Max. Load Capacity: 5000 kg ( 11023 lbs )
Blade Length: 6150 mm ( 242" )
Blade Width: 41mm ( 1 1/2" )
Floor Space: 2000mm x 1780mm ( 79" x 70" )
Overall Height: 2850 mm ( 112" )
Weight: 2850 kg ( 6283 lbs )
OPTIONAL FEATURES
DKO-HMT Hydraulic Motion Table Basically machines have fixed tables. With a hydraulic driven table, the operator should clamp the workpiece on the table then the table stroke is by hydraulic piston. Also the operator can arrange the cutting length by limit switches on the table. On the other hand also operator is able to adjust the cutting speed also this makes cutted surface to look 100% same for all cutting length.
DKO-HBTU Hydraulic Bandsaw Tension Unit This option is applicable only in case the
DK-HMT option is applied on the machine. With this option the operator does not need to use a hand wheel to make the blade under tension for cutting, while the machine is switched on the tension unit works automatically.
DKO-PLC PLC Control Unit Basically machines work with contactors which are controlled by the buttons on the control panel. With this option machine moves will be under control of the PLC unit and also the control will be via 7" Sensitive Touch Screen HMI.
DKO-PS Proximity Sensor This option gives high operational time for cutting. With this option it does not matter where the operator is locating the workpiece, because until the proximity sensor is detected the material table will move at rapid speed until the workpiece. Then it will fall on cutting speed. Therefore operation time will be much faster.
DKO-CL Band Mist coolant system While cutting the soft materials blades are getting heated and this makes blade life less also the cutting speed slower. With Mist Spray Coolant blades will stay always cold therefore the blade life will be longer.
DKO-PDSS-4 Pilz Door Safety System up to 4 Doors Temelsan Vertical bandsaw machines have interlock safety systems as per CE conformity. The Pilz Safety system is needed to reach EN ISO 13849-1/-2 control system safety standards. This option is applicable for the machines which has up to four doors.
DKO-CV Workpiece Hydraulic Clamping Vice Set ( 2 PCS) This option is applicable only for block plate cutting machines. In one set of clamping vices there are two clamping units that the operator will be able to fix on the table true the T-Slots. Operator can control the clamping pressure. Also the operator is able to control the vices from the control panel on the column of the machine.
DKO-LCL Laser for Cutting Line High quality green ( the producer can change the color ) line laser makes operators work easily to replace the workpiece on the table, their operator can see the cutting line clearly.
DKO-SOTT Set-up and Training for Counter, XL and LS Type Bandsaw Machines The SOTT (setup and Operator Training of Temelsan) is made for customers who want to be professionally instructed face to face life at work to operate confidently and professionally the machine they bought from Temelsan. The professional Trainer with a large experience will stay 3 Fully Working days at customers place and instruct the operator for usage and maintenance of machines.
G-DVA Different Voltage Application Temelsan Bandsaw machines are produced to work with 380V AC as an standard. Different working conditions about the power source are acceptable with extra cost as well.
DKO-LWCS Liquid Wet Cutting System It is a solution applied on Block Plate type bandsaw machines for cuts that need to be made with liquid coolant.
Cutting Length
1000 mm (40")
Cutting Height
1000 mm (40")
Table Size
1400 mm x 1000 mm (55" x 40")